Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Duct Repair & Sealing Across Webster
Most duct repair and sealing jobs in Webster run $280-$650 for standard residential work, with full system resealing and insulation replacement on older homes reaching $800-$1,400. We’re typically scheduling 2-3 days out for Webster calls, with dispatch coordinated from our Houston office and crews already working the Clear Lake corridor most days of the week.
Webster sits in one of the most punishing microclimates for ductwork in the entire Houston metro. The combination of persistent bay humidity and the legacy of 2017’s Hurricane Harvey flooding means many homes here need more than a filter swap and a shop-vac run through the registers. Our Duct Repair & Sealing team documents every duct run with before-and-after photography, delivers a written price before any panel comes off, and backs the work with our 365-Day Done Right Promise in writing on every job.
Call (346) 253-1822 for a free written estimate. Estimates include a camera inspection of accessible ductwork so you see what we see before deciding.
Why CleanRun Air Duct Cleaning Pearland Is Webster’s Preferred Duct Repair & Sealing Company
We’ve served Webster since adding the Clear Lake corridor to our route structure in 2015. The 1970s ranch homes off El Camino Real, the subdivisions near Bay Area Boulevard that took on Harvey water, the newer builds in the vicinity of NASA Road 1 - our crews know the housing stock and what fails in each era.
Our reputation here is built on documentation, not claims. Every Webster customer receives a written price before work starts, a photo record of every duct run showing what was found and what was done, and the 365-Day Done Right Promise backed in writing under Haven Standard Clause 1. No manager approval needed. If it’s not right, we make it right.
Technicians are background-checked, uniformed, and identified by name before arrival under Haven Standard Clause 3: Verified Crews. The equipment roster includes Rotobrush agitation systems, Abatement Technologies negative-pressure machines, and Guardsman HEPA filtration - brands you can look up and verify before we start.
Tomas Reyes, who leads CleanRun, established the company in 2013. Every one of the 52,000+ homes we’ve served since then received a written price before work began and a documented photo record when the crew left. That standard applies to Webster jobs exactly as it applies everywhere else we work.
Our Duct Repair & Sealing Services in Webster
Duct Sealing
Supply and return leaks in Webster homes pull unconditioned, moisture-laden Gulf air directly into the system. In a typical 1,800-square-foot ranch off NASA Road 1, we measure duct leakage with a pressure pan test and seal accessible joints with mastic sealant - a water-based compound that remains flexible and bonds to metal, fiberglass, or duct board. Mastic outlasts foil tape in humid conditions, which matters here. Sealing a standard residential system in Webster typically runs $320-$580.
We don’t seal without looking first. Post-Harvey homes near Bay Area Boulevard especially need camera inspection before mastic goes on. Trapping silt and biological growth behind new sealant just feeds odor back through the registers.
Flex Duct Repair
Flex duct runs in attics across Webster’s 1960s-1980s housing stock sag, crush, or separate at collars after decades of Gulf Coast heat cycling. A crushed flex run in a Webster attic doesn’t just reduce airflow - it creates a negative-pressure point that pulls humid bay air through every gap in the building envelope. We replace damaged flex with new insulated duct, support it properly to prevent future sagging, and seal all connections with mastic. Typical flex duct replacement in Webster: $180-$340 per run, with most homes needing 2-4 runs addressed.
Metal Duct Repair
Galvanized trunk lines in older Webster homes corrode at seams and joints, particularly in air handler closets where condensate has dripped for years. We cut out corroded sections, fabricate replacement metal to fit, and seal with mastic rather than tape. Metal repair in Webster typically runs $260-$520 depending on accessibility and the extent of corrosion. Jobs in the original ranch homes near El Camino Real often require more extensive trunk line work simply due to age and the accumulated effect of decades of unfiltered humidity.
Duct Insulation
Condensation on uninsulated or degraded duct surfaces is a constant problem in Webster’s climate. When cold supply air runs through a 130-degree attic wrapped in crumbling fiberglass insulation, the outer surface sweats. That moisture drips onto ceiling drywall, stains it, and feeds mold inside the duct board itself. We wrap trunk lines and replace degraded insulation with new fiberglass or closed-cell insulation rated for high-humidity applications. Full duct insulation replacement on a standard Webster home: $480-$890.
The editorial lens for this page is humidity and salt air. Duct insulation in Webster isn’t about energy efficiency alone. It’s about keeping the duct surface temperature above the dew point so the system stops generating its own moisture problem.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Webster
Our equipment includes Rotobrush mechanical agitation systems for source removal from deteriorated duct board, Abatement Technologies negative-pressure extractors that maintain containment during cleaning and repair work, and Guardsman HEPA filtration rated to 0.3 microns. We stock mastic sealant, duct board, flex duct, and insulation materials sized for the residential systems common in Webster’s housing stock - the 14-inch and 16-inch trunk lines typical of 1970s ranch construction, the 6-inch and 8-inch supply branches. Parts availability means most Webster repairs don’t wait on a supply house run.
Common Duct Repair & Sealing Problems We See in Webster Homes
- Crumbled fiberglass duct board releasing particulates. The interior liner on 1970s-1980s duct board systems has reached end of life. The surface that was once smooth is now rough, porous, and shedding fiberglass into the airstream. A filter change doesn’t touch this. The camera shows it immediately.
- Post-Harvey silt and biological growth in ductwork that was never remediated. Homes near Bay Area Boulevard and El Camino Real that took on floodwater often had drywall replaced but ductwork left untouched. Our cameras find silty residue and active mold colonies years later. The musty smell at the registers is the giveaway.
- Leaky plenum joints pulling unfiltered attic air. The plenum - the box that connects your air handler to the duct trunk - separates at seams over time. In Webster’s humidity, that leak point draws 130-degree, moisture-saturated attic air into the system every time the blower cycles. Mastic sealing stops it.
- Fogging “sanitiser” treatments sold as a substitute for source removal. A misted chemical coating doesn’t remove crumbled duct board or Harvey silt. In Webster’s persistent humidity, mold regrows within weeks on the still-damp, still-contaminated surface. We see this repeatedly in homes that paid for fogging first, then called us when the smell returned.
Pricing for Duct Repair & Sealing in Webster, TX
| Service | Typical Range in Webster |
|---|---|
| Duct sealing (mastic, standard residential) | $320-$580 |
| Flex duct repair / replacement (per run) | $180-$340 |
| Metal duct repair (trunk line section) | $260-$520 |
| Duct insulation replacement (full system) | $480-$890 |
| Combined sealing + insulation + spot repair | $800-$1,400 |
These ranges reflect Webster’s market specifically - labor rates, material costs, and the typical scope of work we encounter in this housing stock. Every job starts with a camera inspection and a written price delivered before any work begins. No per-vent pricing. No coupon that balloons once the truck arrives. One flat price per system, agreed in writing, under Haven Standard Clause 1.
Bring a competitor’s written estimate and we’ll provide a free second opinion, our number next to theirs, no obligation.
We Also Serve Cities Near Webster
Our crews work the full Clear Lake and south Houston corridor daily. If you’re in Webster, Friendswood, League City, Seabrook, or Pearland, scheduling is coordinated from our Houston office with routes optimized for same-week availability. The housing stock, humidity conditions, and post-Harvey repair history in these communities are similar - we apply the same documentation standard and the same written pricing protocol to every call.
Serving Webster, TX - Our Local Coverage Area
We’re based in the Webster area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Duct Repair & Sealing in Webster
Webster’s position between Clear Lake and Galveston Bay keeps relative humidity persistently higher than inland Harris County suburbs, so AC condensate and Gulf moisture cycle through ductwork 10-11 months a year. Biological growth reaches problem levels in a fraction of the time it takes inland. Your friend’s Katy home may go weeks between humidity spikes that your Webster system sees daily. Call (346) 253-1822 for a camera inspection and written estimate - we’ll show you exactly what’s growing and where.
No. Fogging coats surfaces with a chemical mist but does not remove source material - the silt, crumbled duct board, and active mold colonies that Harbor-area flooding deposited inside ductwork. In Webster’s humidity, those porous surfaces stay damp and contaminated, and mold regrows within weeks. Source removal with mechanical agitation and negative-pressure extraction, followed by sealing and insulation replacement where needed, is the only approach that addresses the actual problem. Call (346) 253-1822 for a free estimate with camera inspection.
Check whether the ductwork was inspected, not just the living space. We regularly find homes near Bay Area Boulevard and El Camino Real where drywall was replaced but the fiberglass duct board inside the air handler closet was never touched. The camera reveals silty residue and black growth that standard filters cannot capture. That musty smell at the registers is the duct system, not the walls. A written estimate from CleanRun includes camera documentation so you see the source before deciding on any work.
After cleaning, always. Sealing first traps debris, moisture, and biological growth inside the duct run, where it continues to off-gas and feed musty odors through the supply registers. Our protocol: camera inspection, source removal with documented photography, then mastic sealing of accessible joints, then insulation replacement where degraded. Each step is photographed and included in your job record. Call (346) 253-1822 to schedule the full sequence.
The camera shows it immediately. Failing duct board has a rough, porous interior surface where the smooth fiberglass liner has crumbled away - it looks like exposed insulation inside the duct. Cleaning alone doesn’t restore a smooth surface; agitation on crumbling board can actually increase particulate release. If the camera shows this condition, we recommend repair or replacement of the affected sections, sealed with mastic and wrapped with new insulation. The photo record lets you see the difference and make an informed decision. Call (346) 253-1822 for a free inspection and written price.
Ready to see what’s actually inside your ductwork? Call CleanRun Air Duct Cleaning Pearland at (346) 253-1822 for a free written estimate. Every estimate includes camera inspection of accessible duct runs, a flat price per system agreed before any work starts, and the full photo documentation standard we’ve held since 2013. No fogging upsells. No per-vent pricing. Just documented evidence and work you can verify.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Pearland, serving Webster since 2015.