Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Air Duct Cleaning Across Fresno
Air duct cleaning for a typical Fresno home runs $380-$680 for a full system, and every job starts with a written flat price before we touch a single panel. We’re CleanRun Duct Repair & Cleaning, and our crews work Fresno regularly - from the newer subdivisions off Harlem Road to the established streets near Teal Run Boulevard. Dispatch and scheduling are coordinated from our Houston office, but the trucks that roll to Fresno carry Rotobrush and Abatement Technologies equipment, background-checked technicians in uniform, and the same written-price protocol we’ve used on every job since 2013. If your home was built in the 2000s or 2010s, your flex-duct system is likely at the age where it needs its first professional cleaning - and its first honest inspection for crushed or sagging runs. Call (346) 253-1822 for a free written estimate.
Why CleanRun Air Duct Cleaning Pearland Is Fresno’s Preferred Air Duct Cleaning Company
We’ve served the Fort Bend County corridor since 2013, and Fresno’s housing stock is familiar territory. The 2000s-era tract homes with flex duct routed through unconditioned attics, the 2010s builds with the same cost-cutting hanger spacing - we’ve documented the inside of thousands of these systems. Our Air Duct Cleaning team photographs every duct run before and after, so Fresno homeowners see what was actually removed, not just hear a vacuum running.
Our technicians are background-checked and uniformed under Haven Standard Clause 3: Verified Crews. Tomas Reyes, who leads CleanRun, has insisted since our first job that no work starts without a written price and no crew leaves without a documented photo record. That’s 52,000+ homes, every one with a written price agreed before work began.
We answer calls with a live person, 24/7. If you bring us a competitor’s written estimate, we’ll deliver a free second opinion in writing - Haven Standard Clause 7. No “call for pricing.” The number is on the page, and the estimate is free.
Our Air Duct Cleaning Services in Fresno

Residential Duct Cleaning
Fresno’s homes are overwhelmingly single-family builds from the 2000s and 2010s, which means flex-duct systems now hitting 10-15 years of age. In the Houston metro’s extreme humidity belt, where dew points stay above 70°F from May through October, these systems accumulate more than dust. We use negative-pressure extraction - pulling debris out with a vacuum stronger than the duct’s airflow - plus agitation tools from Rotobrush that dislodge buildup without damaging flex-duct liners. Every supply and return run is photographed. You get the photo record as a standard deliverable, not an upsell.

Commercial Duct Cleaning
Fresno’s commercial growth along Highway 6 and in the retail corridors near Missouri City brings us to office suites, medical tenants, and light industrial spaces with metal ductwork and rooftop units. Commercial systems differ from residential: larger plenums (the main distribution boxes), harder access points, and different contamination patterns. We size our Nikro and Abatement Technologies equipment to the system, quote a flat price per system in writing, and deliver the same documented photo record - before and after every duct run, registers included.

Supply Duct Cleaning
Supply ducts push conditioned air into your rooms. In Fresno homes with sagging flex runs, the supply side is where we most often find crushed ducts trapping debris and choking airflow. Our process: inspect for structural damage first, then clean with negative pressure and HEPA filtration so dislodged particles exit the system rather than resettle in your living space. The supply side is also where we most commonly photograph mold staining or condensation damage - the humidity problem Fresno’s climate creates when duct seals fail.

Return Duct Cleaning
Return ducts pull air back to the air handler, and they’re the system’s intake - meaning every airborne particle in your Fresno home passes through eventually. Return trunks in 2000s-era builds are often undersized or poorly sealed, pulling hot attic air and insulation debris along with living-space air. We inspect return plenums and trunks for leaks, clean with negative-pressure extraction, and document the condition. A compromised return duct in a Fresno attic, where summer temperatures exceed 140°F, is an efficiency killer and a debris source combined.

Full System Cleaning
This is our most common request in Fresno, and it’s what most homeowners actually need: complete cleaning of supply ducts, return ducts, the plenum, and accessible components at the air handler. One flat price per system, agreed in writing before we start. No per-vent add-ons. The full system cleaning includes our crushed-flex inspection - critical in Fresno’s subdivisions - and the complete photo record delivered to you.

Video Inspection
Before we quote a cleaning, we can run a video scope through your ductwork. In Fresno’s 2000s-era homes, this often reveals sagging flex, disconnected joints, or debris patterns that explain uneven cooling or elevated energy bills. The video inspection gives us - and you - a factual basis for deciding whether cleaning is needed, whether repair is more urgent, or whether the system is sound. We charge for video inspection as a standalone service, or waive it if you proceed with a full system cleaning.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Fresno
Our equipment roster includes Rotobrush agitation systems, Abatement Technologies negative-pressure machines, and Aprilaire media filters - brands you can look up independently to verify specifications. We don’t invent performance claims. What we do: name the equipment, show you the before-and-after photos of your own ducts, and let the documentation speak. For Fresno homeowners researching every service category before making contact, this transparency is the point. We carry common fittings and replacement components for these systems, so if a video inspection or cleaning reveals a separable duct joint or failed seal, we can often address it during the same visit without a return trip.
Common Air Duct Cleaning Problems We See in Fresno Homes

- Crushed and sagging flex duct from minimal hanger spacing. In Fresno’s 2000s-2010s subdivisions, builders hung flex duct on widely spaced supports to cut costs. After a decade-plus of Houston attic heat cycling, these runs sag into kinks that trap debris and restrict airflow. A clean but kinked duct still chokes your system.
- Condensation-driven microbial growth. Fresno sits in the Houston metro’s most persistently humid zone. When duct seals fail or AC systems short-cycle, warm humid attic air contacts cool duct surfaces and creates the moisture conditions that seed mold colonies. We photograph this when we find it.
- Drywall dust and insulation debris from original construction. Homes built during Fresno’s rapid growth in the 2000s and 2010s often still contain original construction debris in ductwork - particularly in return trunks that were open during the drywall phase. This isn’t “dirt from living in the house”; it’s debris from building it.
- Per-vent pricing that inflates the final bill. Some competitors quote a low teaser rate per vent or per register, then multiply by your home’s register count. A Fresno home with 12 supply registers and 4 returns faces a very different final invoice than the coupon suggested. We quote one flat price per system, period - Haven Standard Clause 1.
Pricing for Air Duct Cleaning in Fresno, TX
A typical residential full system cleaning in Fresno runs $380-$680 for a single-system home. Two-system homes, common in larger Fresno builds, typically range $620-$980. Commercial duct cleaning is priced per system based on linear footage and access difficulty; most Fresno commercial quotes fall between $1,200-$3,400.
| Service | Fresno Price Range |
|---|---|
| Residential Full System Cleaning (1 system) | $380 - $680 |
| Residential Full System Cleaning (2 systems) | $620 - $980 |
| Supply or Return Duct Cleaning Only | $240 - $420 |
| Video Inspection (standalone) | $180 - $280 |
| Commercial Duct Cleaning (per system) | $1,200 - $3,400 |
What moves a quote within these ranges: system accessibility, the presence of mold or heavy debris requiring extended agitation time, and whether crushed-flex repair or re-support is needed. We deliver the written price before any work starts. No per-vent pricing. No post-work invoice surprises. Call (346) 253-1822 for your free written estimate.
We Also Serve Cities Near Fresno

Our crews work throughout the Fort Bend and Brazoria County corridor. If you’re in Fresno or nearby Missouri City, Manvel, Stafford, or Sugar Land, the same written-price protocol and documented photo record apply. Dispatch is coordinated from our Houston office, with local routing to minimize transit time to your property.
Serving Fresno, TX - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Air Duct Cleaning in Fresno

Most Fresno homes need professional duct cleaning every 5-7 years, though homes with pets, recent renovations, or confirmed mold issues may need it sooner. The 2000s-2010s flex-duct systems common in Fresno are now reaching the age where first-time cleaning is genuinely warranted - not annually, and not never. Call (346) 253-1822 for a free estimate and we’ll tell you if your system needs it now or can wait.
Fresno’s dew points regularly exceed 70°F from May through October, and when duct seals fail or AC short-cycles, that humid attic air condenses on cool duct surfaces - creating the moisture that seeds mold colonies. In drier climates, dust accumulation is the main concern; here, it’s a health-driven service because microbial growth is a recurring threat, not a hypothetical. Our crews photograph any mold or condensation damage we find and include it in your documented photo record.
A proper cleaning includes negative-pressure extraction with HEPA filtration, mechanical agitation to dislodge debris, inspection for crushed or sagging flex duct, and a documented photo record of every run before and after. In Fresno specifically, the crushed-flex inspection is non-negotiable - a clean but kinked duct still chokes airflow and wastes energy. We also inspect plenum seals and register connections, since the original construction in many Fresno subdivisions used minimal sealing.
We charge one flat price per system, never per vent or per register. Haven Standard Clause 1 requires a written price before any work starts, and that price covers the complete system - however many registers your home has. Per-vent pricing is how competitors turn a $79 coupon into a $600+ invoice. Our flat pricing means you know the exact cost before we begin. Call (346) 253-1822 for your written estimate.
Duct cleaning can reduce energy bills if the root cause is debris restriction or crushed flex duct blocking airflow - both common in Fresno’s 2000s-era systems. In the Winfield Lakes subdivision off Harlem Road, we re-supported a sagging flex run and dropped the homeowner’s static pressure enough to stop their AC from short-cycling. But if your ducts are clean and structurally sound, cleaning won’t move your bill. We use video inspection to determine whether duct issues are actually driving your costs before recommending service.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Fresno since 2013.




Before
After
Before
After